Screen Door Hardware

This Andersen roller assembly is an insert style with mounting tabs and include installation screws. The high density polyethylene housing has an aluminum inner housing with a 1 in. high density polyethylene roller. This roller assembly is used on the 200 Series Perma-Shield Gliding Doors and 400 Series Frenchwood doors. Height adjustment is down from the side rather than the top or the edge of the door.

This sliding screen door roller assembly insert has a thinner high density polyethylene frame than the Prime-Line part B 646. It has an adjustable high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used on a variety of other sliding screen door manufacturers. Please note dimensions and design when comparing with old roller.

This sliding screen door assembly is made from a steel housing and spring-loaded arm with the 1 in. steel high density polyethylene roller attached is used by Bay-Mills as well as a variety of other patio door manufacturers. The roller arm is spring-loaded and adjusted by the adjustment sleeve and screw on top.

This steel housing and spring-loaded arm with the 1 in. steel ball bearing roller attached. Used by Bay-Mills as well as a variety of other patio door manufacturers. The roller arm is spring-loaded and adjusted by the adjustment sleeve and screw on top.

This sliding screen door roller assembly fits the andersen narroline, frenchwood, and perma-Shield doors. The roller assembly snaps into place with the adjustment stem, being accessible on the edge of the door frame. Housing is high-density polyethylene with a grooved 1-1/4 in. diameter high density polyethylene roller.