Screen Door Hardware

This sliding screen door roller assembly insert has an aluminum frame with a high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the correct position needed. This style is often on Columbia sliding screen doors but is also used by very many other screen door manufacturers. Please note dimensions and design when comparing with old roller.

This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1 in. high density polyethylene roller and fits onto the Prime-Line part B 569 corner insert. It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers.

This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. Guide roller is a 11/16 in. oval ball bearing high density polyethylene roller. Use Prime-Line part B 544 for the bottom roller.

This high density polyethylene roller assembly was used on HiLite doors. It is a high density polyethylene bracket with a spring-loaded 9/16 in. diameter flat edged high density polyethylene roller inside. Fits into a rectangle slot in the bottom of the door and is held in by the included screw. For the top roller assembly use Prime-Line part B 543.

This steel ball bearing roller features a 1 In. center grooved wheel. Also features a 1/4 In. diameter axle hole. Used by many door manufacturers.

This roller is used by Air Control sliding screen doors as well as glass patio doors using a narrow grooved roller. It is used in various applications by many patio door manufacturers. It is a high density polyethylene roller 1 in. in diameter by 7/32 in. thick. It has a 1/4 in. axle hole. This roller comes with a 8-32 x 3/8 in. machine screw and binder post for installation into the bottom screen frame rail.