Raw Building Materials

Commercial grade polymer modified, multipurpose concrete repair mortar for making thin repairs to chipped, cracked or flaking concrete surfaces and masonry surfaces. Adheres to concrete, bricks, block and stone. Trowels to a feather edge of 1/16 inch. Use in cracks less than 1/8 inch wide or in expansion joints. For deep repairs on vertical surfaces apply in 1/4 inch layers. Allow 2 hour drying time between layers. Exceeds the compressive strength requirements of ASTM C-387. Ready-to-use.

A properly graded fine sand used to fill joints between interlocking pavers, flagstone, bricks or patio block.

Quikrete Quick-Setting Cement is a Portland cement based formula that is specially formulated for making structural repairs to vertical and overhead surfaces.

A polymer modified shrinkage compensated, rapid setting, high strength mortar specifically formulated to make structural repairs in vertical and overhead applications.

Quikrete Cement Color is a liquid additive for adding color to concrete, mortar, sand mix, stucco and other cement mixes. Quikrete Cement Color is added to the water before mixing into the dry Quikrete cement mix. Use Quikrete Cement Color with Quikrete cement mixes to add color to a variety of projects, including: curbs, driveways, fishponds, floors, patios, sidewalks, steps and stucco. Cement Color is particularly recommended for use with the Quikrete Walk Maker plastic building molds.

A dual purpose product. As a fluid grout meeting ASTM C 1107, it is used for the anchoring and grouting of anchor bolts, equipment, retrofitted reinforced steel, steel column bases, bearing plates, pre cast concrete keyways and other installations that require high early and high ultimate strength. This product has characteristics which make it stable and capable of handling load transfers.