Prime-Line

These extension springs from Prime-Line are constructed from 0.105 gauge, heat-tempered, spring steel wire plated in a bright nickel finish. They offer superior strength and long lasting tension. These springs feature a single loop, open-ended design and measure 2-7/16 inch in length by 3/4 inch in diameter. This type of spring can be used on toys, equipment, tools and for a variety of other household applications.

Painted steel track; steel top pivot brackets are pre-installed to track; steel bottom pivot brackets; brass plated steel hinges; roller guides and pivots have a 7/16" diameter plastic base with steel pins; steel spring snugger with plastic retainer sleeve; zinc plated steel aligners; unfinished wood knobs. Track length is pre-cut to slightly less than opening size to minimize the need to cut the track; use with wood door panels 1" to 1-3/8" thick. For use on doors weighing up to 30lbs each.

This sliding screen door handle and latch is used on Anjac, as well as a variety of other patio door manufacturers. It is non-handed and used on 1/2 in. thick to 1-5/8 in. wide screen door frame. The nylon latch hook is 3/16 in. long and fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in. mounting holes and can be opened from both sides. There is a night lock on the inside. The nylon latch rotates to engage or disengage the Prime-Line part A 125.

These Prime-Line products plastic sliding screen door latch and pull with security lock this black plastic door latch can be used in right and left handed applications, is compatible with Columbia doors and fits 1/2 in. thick doors.

This is a diecast metal keeper or strike that is used by a variety of screen door manufacturers. Dimensions are 7/32 inch wide with a 1/4 inch projection. Features a downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch. All the necessary mounting hardware is included for a quick and easy installation. For other different projections see Prime-Line parts A 126, A 128 or A 203.

This is a diecast single point mortise lock with cast mounting bracket. The high security bracket section allows the handle mounting screws to anchor through the lock. Mounting holes are 5-3/8 in. on center. The adjusting screw on the faceplate for easy adjustments with a slotted head screwdriver.