Rain Drip 156005B Bubbler Adjustable Bg/5 (EA)
Regulate the amount of water delivered to your plants with a twist of a knob using the Adjustable Flow Bubbler. Bubbler discharges up to 11.7 GPH, with throw of up to 16 in. radius (at 15-50 PSI). Flow is adjusted by turning the head of the bubbler which acts as a dial. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors.
$6.59
Rain Drip 380050B Raindrip Drip Irrigation Tubing Support (EA)
Anchor supply tubing in place and position the emitter near the root of your plant with the 1/4 in. Tubing Support Stake. The 4 in. stake has a hook on top for 1/4 in. supply tubing or an emitter attached to tubing, such as a button dripper, inline dripper, or Take-A-Part flag dripper. Stake pierces into the ground and lifts the emitter above soil or mulch to prevent particles from entering and clogging the emitter. Ideal for flower and vegetable gardens, trees, shrubs, and container plants. This tubing support stake is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.
$9.99
Rain Drip 381010B Raindrip 381010B 1/8-Inch - 1/4-Inch Heavy-Duty Tubing Support Stake for Drip Irrigation Supply Tubing and Drip Systems, 6-Inch Long, Plastic, 10-Pack, Black (EA)
Make sure your drip system supply tubing and emitter stay in place with the 1/8 in - 1/4 in. Heavy-Duty Tubing Support Stake. The sturdy stake has built-in notches to hold 1/8 in. to 1/4 in. distribution tubing or an emitter attached to tubing, such as a button dripper, inline dripper, or Take-A-Part flag dripper. Use the stake to secure different sized tubing or use tubing to make additional passes around plants. The 6 in. stake keeps the emitter above soil and mulch to prevent clogging and makes it easier to adjust the emitter as needed. Ideal for flower and vegetable gardens, and around trees, shrubs, and container plants. This tubing support stake is made of acrylonitrile butadiene styrene (ABS) with UV inhibitors.
$3.99
Rain Drip 381025B Raindrip 381025B 1/8-Inch - 1/4-Inch Heavy-Duty Tubing Support Stake for Drip Irrigation Supply Tubing and Drip Systems, 6-Inch Long, Plastic, 25-Pack, Black (EA)
Make sure your drip system supply tubing and emitter stay in place with the 1/8 in -1/4 in. Heavy-Duty Tubing Support Stake. The sturdy stake has built-in notches to hold 1/8 in. to 1/4 in. distribution tubing or an emitter attached to tubing, such as a button dripper, inline dripper, or Take-A-Part flag dripper. Use the stake to secure different sized tubing or use tubing to make additional passes around plants. The 6 in. stake keeps the emitter above soil and mulch to prevent clogging and makes it easier to adjust the emitter as needed. Ideal for flower and vegetable gardens, and around trees, shrubs, and container plants. This tubing support stake is made of acrylonitrile butadiene styrene (ABS) with UV inhibitors.
$8.99
Rain Drip 384R0UB Raindrip 384R0UB 13-Inch Sprinkler Stake with 8-Inch Adjustable Riser for Drip Irrigation Supply Tubing and Drip Systems, Plastic, Black (EA)
Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the 1/4 in. barbed inlet at the bottom of the rigid riser, then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.
$2.39
