Garden Stakes

Add height to the emitter in your drip system using the 8 in. Sprinkler Stake with 4 in. Riser. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet or 10-32 threaded inlet on top of the riser. The riser sits on top of the sprinkler stake, where a barbed inlet fits 1/4 in. supply tubing. Position stake to provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in. barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the1/4 in. barbed inlet at the bottom of the rigid riser; then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.

No need to wrestle with tubing or struggle to keep wayward emitters in place when you tack them down securely with the 1/2 in. -0.710 in. Tubing Stake. Works like a giant staple to hold down supply tubing so they stay just where you want them, yet removes easily so you can expand or change your drip watering system as needed. Also known as a U Support Stake, the 12 in. metal stake is ideal for keeping supply tubing and emitters in place to water flower and vegetable gardens, trees, shrubs, and container plants. It can also be used to hold down chicken wire or tarp for other garden projects. Made of galvanized steel and withstands extreme climate conditions.

No need to wrestle with tubing or struggle to keep wayward emitters in place when you tack them down securely with the 1/4 in. Tubing Hold-Down Stake. Works like a giant staple to hold down supply tubing so they stay just where you want them, yet removes easily so you can expand or change your drip watering system as needed. Also known as a U Support Stake, the 3-1/2 in. metal stake is ideal for keeping supply tubing and emitters in place to water flower and vegetable gardens, trees, shrubs, and container plants. It can also be used to hold down chicken wire or tarp for other garden projects. Made of galvanized steel and withstands extreme climate conditions.

This 1/4 inch Polyflex Riser Stake helps you apply water like a spray head on an underground system. The stake holds spray devices above plants. This way, the spray achieves good water coverage.

Rain Bird TS25/10PS Drip Irrigation 1/4 in. Tubing Stake with Bug Cap Diffuser and Locking Cap, 10-Pack. Tubing stake secures 1/4 in. Drip tubing at desired locations or spot-watering drippers/emitters in place at the root zone. Designed to hold 1/4 in. tubing from 0.19 in. to 0.256 in. outside diameter. Includes attached diffuser "bug-cap" and "locking-cap". Remove "bug-cap" from stake and feed onto end of 1/4 in. tubing to prevent insects and debris from clogging tubing opening. Use "locking-cap" to lock/close opening at top of stake to prevent tubing from slipping out. Rigid design constructed of highly durable U-V and chemical resistant plastic materials for long life. Convenient re-sealable zip lock plastic bag contains 10 stakes. Rain Bird "The Intelligent Use of Water".