Save time and money when you switch from watering plants by hand to effortless drip irrigation. The Automatic Watering Kit with Timer for Containers & Hanging Baskets has everything you need to water up to 20 individual plants with precision watering for optimal growth & health. The #1 bestseller includes a timer to automate watering; 75 ft. of 1/4 in. supply tubing & adapter to connect to a faucet; 20 1/2 GPH pressure-compensating (PC) drippers, 20 stakes, 10 clamps, plus barbed couplings, elbows, tees, & end plug. Set, connect, and water-the easy 3-step installation gets you drip-ready in minutes.
The Raindrip Watering Kit for Vegetable Gardens makes it easy for any level gardener to set up a drip system. Get strong, vibrant gardens with easy-to-use components to water plants for optimal growth and overall health. The all-in-one kit includes 50 ft. of dripline (the first 15 ft. without drippers carries the water from faucet to plants); 1/2 GPH non-pressure compensating drippers spaced 12 in. apart & swivel adapter to connect to faucet; 10 galvanized steel stakes, & end plug to seal the end of the line. Forget hand watering with hose; save time and water with drip for a better way to water.
Prevent emitters from clogging by blocking particulates in water with the "Y" Filter. This component has a 3/4 in. MPT connection point on both ends to connect to 3/4 in. FPT spigot or pipe, such as a sprinkler riser in the ground. Pipe threads create a watertight seal when screwed tightly together. To install, position the directional arrow in the direction of water flow. The "Y" filter comes with a 150-mesh filter that is easily removable for maintenance; just unscrew the flush cap or cleanout cap, remove the middle housing, and pull out the filter to clean. The "Y" Filter is made of acrylonitrile butadiene styrene (ABS), and contains a polyvinyl chloride (PVC) washer with polyester filter, all treated with UV inhibitors
The Barbed Inline Valve allows flow of water to two areas that require separate watering conditions. Install between two lengths of supply tubing to water two separate circuits, irrigation zones, or different types of plants. Adjust, balance, or shut off water flow with a twist of the dial. Works great for watering one area with new plantings and another with established plants; or two distinct plant zones that do not require the same amount of water. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Barbed fittings on both sides of the valve accommodate 1/4 in. supply tubing with 0.170 in. internal diameter (ID). The 1/4 in. Barbed Inline Valve is made of ABS treated with UV inhibitors.
The Barbed Inline Valve allows flow of water to two areas that require separate watering conditions. Install between two lengths of supply tubing to water two separate circuits, irrigation zones, or different types of plants. Adjust, balance, or shut off water flow with a twist of the dial. Works great for watering one area with new plantings and another with established plants; or two distinct plant zones that do not require the same amount of water. Ideal for flower beds, vegetable gardens, trees, shrubs, and container plants. Barbed fittings on both sides of the valve accommodate 1/4 in. supply tubing with 0.170 in. internal diameter (ID). The 1/4 in. Barbed Inline Valve is made of ABS treated with UV inhibitors.
Prevent impure water from flowing back and contaminating the clean water supply with the Anti-Siphon Backflow Preventer. Required by most local health codes when using a potable, and sometimes non-potable water source for your drip system. The atmospheric vacuum breaker has a 3/4 in. FHT connection which threads onto the hose bibb or faucet; 3/4 in. MPT connection on the other side to attach to 3/4 in. FPT pipe. Removable filter washer blocks particles that can clog emitters. Use the directional arrow on the device to position in the direction of water flow. The Anti-Siphon Backflow Preventer is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.