Tube Fittings

Need to make a change to an installed SharkBite fitting or remove it. Disassembly is fast and easy using the Disconnect Clip. This product is available in a variety of sizes ranging from 1/4 inch to 1 inch.

The SharkBite PEX barb 1/2-in x 3/8-in x 3/8-in reducer tee is an easy to install, low cost solution to connect PEX tubing. SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamping system or the copper crimp ring system (both sold separately). The SharkBite PEX barb fitting range offers a wide variety of fittings, manifolds, valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Scholar on 40, 80, 120 PVC Pipe. The 3-Pack contains a 1/2 inch, 3/4 inch and 1 inch disconnect clip. The PVC disconnect clip will release the fitting on the white collar of the fitting. The PVC disconnect clip also serves as a safe seal depth gauge to mark the PVC pipe to ensure the fitting has been inserted to the proper depth.

SharkBite Max Brushed Nickel Angle stops are used on stub-outs coming out of the wall and used to control and shut-off water flow to fixtures and appliances for maintenance and repair. Innovative design with 1/2 in. push-to-connect inlet makes for quick installation and quarter turn full-port brass ball valves makes for easy operation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

SharkBite Elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 degree connection. With no soldering, clamps, unions or glue required, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by the specially-formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating applications with no access panels required. It is rated up to 200 degree Fahrenheit and 200 PSI.

SharkBite Polybutylene Conversion Coupling is the easiest way to transition your Polybutylene water line to a different type of pipe. This fitting has color-coordinated collars on each end to help you easily identify which side goes with which pipe. The gray-colored collar is intended for use on Polybutylene pipe while the tan-colored collar is intended for Copper, PEX, CPVC or PE-RT. There is no soldering, clamps, unions or glue required when using SharkBite push-fit fittings. This fitting is not intended to be connected to Polybutylene pipe on both sides of the fitting.