Plant Support Structures

These 1/2 inch Galvanized Stakes help secure tubing and emitters to individual plants. The stakes help conform tubing to your landscape with mulch. Adds supplemental watering to individual plants.

Ready to install, the Winged Jet Assembly comes preassembled with the sprayer, riser, barbed inlet, and stake. Set up is simple-put stake in the ground, set the riser height, then connect 1/4 in. tubing to the 1/4 in. inlet. Fan spray emits water in a full-circle pattern at up to 31.4 GPH and radius of up to 5.4 ft. (at 15-50 PSI). The winged jet, designed like the winged nut, has thumb grips to remove easily for cleaning. Provides low volume overhead irrigation for gardens, flower beds, ground cover, and hillsides. Assembly is made of polyethylene treated with UV inhibitors.

Rain Bird Drip Irrigation 1/2 in. Poly Tubing Stake. Tough polymer stake securely holds all brands of 5/8 in., 1/2 in., and .700 in. Drip irrigation tubing snugly in place. Curved design provides a handy spot for your hand to comfortably rest while pushing the sharp point into soil. Flat top portion is tough enough to gently pound stake into place. Constructed of highly durable UV and chemical-resistant materials to assure long life.

Anchor supply tubing in place and position the emitter near the root of your plant with the 1/4 in. Tubing Support Stake. The 4 in. stake has a hook on top for 1/4 in. supply tubing or an emitter attached to tubing, such as a button dripper, inline dripper, or Take-A-Part flag dripper. Stake pierces into the ground and lifts the emitter above soil or mulch to prevent particles from entering and clogging the emitter. Ideal for flower and vegetable gardens, trees, shrubs, and container plants. This tubing support stake is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.

Add height to the emitter in your drip system using the 8 in. Sprinkler Stake with 4 in. Riser. Fits a low-flow sprinkler, sprayer, or jet with a 1/4 in. barbed inlet or 10-32 threaded inlet on top of the riser. The riser sits on top of the sprinkler stake, where a barbed inlet fits 1/4 in. supply tubing. Position stake to provide convenient overhead watering to your plants. Your hand-watering days are over! The riser is made of polyethylene and the stake is made of acrylonitrile butadiene styrene (ABS), both treated with UV inhibitors.

Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in. barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the1/4 in. barbed inlet at the bottom of the rigid riser; then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.