Latex-Ite

Trowel Patch is a patented, black, cement-like formula that's especially recommended for shallow repairs and wide cracks in asphalt paving. It repairs medium to large cracks, smooth rough spots and fills minor depressions. It trowels to a smooth, feather-edge finish and has Fass-Dri technology for rapid drying and setting.

Latexite Pli-Stix 30 feet medium 1/2 inch black permanent asphalt crack filler is the only permanent solution to cracks on the marketplace. It is the same product seen on highways and roads but the only difference is you can apply it and don't need a 200 gallon melter to do it. The medium pli-stix is designed for cracks 1/2 to 1 inch in diameter

Latexite Airport Grade Driveway Filler Sealer is an asphalt emulsion based driveway sealer designed to beautify and protect your driveway. Airport Grade is an advanced formula that contains polymer additives for strength and flexibility.

The Latex-ite Airport Grade + Driveway Filler Sealer is a commercial strength, polymer modified asphalt emulsion-based low-VOC formula designed to beautify and protect your blacktop pavement. This non-skid sealer fills hairline cracks (1/8 in. or less) and is polymer fortified for added durability. Helpful hints before you seal your driveway: 1) Figure out how many pails you need by using the coverage information below in the bullet points. The size and condition of your pavement will dictate how many you need. 2) Flip pails overnight prior to application (it will be much easier to mix in the morning and will ensure consistency). 3) Do the project all at one time without starting and stopping. 4) Check the weather and make sure no rain is forecasted and it is at least 55 degrees F at night (a cold driveway will not allow the sealer to cure properly). 5) Check latexite.com for further tips and how-to videos. (Please note: if product is not available to order in your area, it is due to nighttime temperatures).