Hose Connectors & Accessories

Add a T intersection to create a lateral line or branch in your drip system with the 1/2 in. Compression Tee. The fitting joins three sections of 1/2 in. supply tubing or dripline. To install, insert tubing inside the compression ring, where an internal barb compresses the tubing for a watertight connection. Having trouble with the tubing? Try rocking it back and forth while applying pressure, or soften the tube with a hot water soak or leaving it out in the sun. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Add a T intersection to create a lateral line or branch in your drip system with the 5/8 in. Compression Tee. The fitting joins three sections of 5/8 in. supply tubing or dripline. To install, insert tubing inside the compression ring, where an internal barb compresses the tubing for a watertight connection. Having trouble with the tubing? Try rocking it back and forth while applying pressure, or soften the tube with a hot water soak or leaving it out in the sun. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Make a transition from main line pipe or manifold to 0.710 distribution tubing or dripline in your drip system with the 0.710 in. X 3/4 in. FPT Compression Swivel Adapter. Convenient built-in swivel enables the end of the fitting to turn when attaching or removing it to keep tubing straight and prevent kinking. The fitting threads onto a 3/4 in. MPT connection point on one end and receives 0.710 in. tubing on the other end, where an internal barb compresses the tube for a watertight fit. This compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Put a 90 turn in your drip system using the 0.710 in. Compression Elbow. The El fitting joins two sections of 0.710 in. supply tubing or dripline at an angle to prevent kinking. Insert tubing inside the compression ring, where a barb compresses the tube to create a watertight connection. Attach by rocking the tubing back and forth while applying pressure; for tough tubing, soak in hot water or leave out in the sun to make it more pliable. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Prevent water from flowing out the end of your tubing with the 1/2 in. Compression End Cap. This fitting works with 1/2 in. distribution tubing or dripline, and has a removable cap to flush out the line as needed or to expand your system. Tubing fits into the compression ring, where an internal barb compresses the tube. Got tough tubing? Try softening the tubing material by soaking the ends in hot water or leaving them out in the sun. The compression end cap is made of acrylonitrile butadiene styrene (ABS), a type of plastic, treated with UV inhibitors to prevent cracking.

Transfer water from your main line pipe or manifold to 1/2 distribution tubing or dripline with the 1/2 in. X 3/4 in. FPT Compression Swivel Adapter. Convenient built-in swivel enables the end of the fitting to turn when attaching or removing it to keep tubing straight and prevent kinking. The fitting threads onto a 3/4 in. MPT connection point on one end and receives 1/2 in. tubing on the other end, where an internal barb compresses the tube for a watertight fit. This compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.