RELIANCE CONTROLS 306CRK Reliance Controls 306CRK Generator Transfer Switch ~ 6 Circuit (EA)
The Pro/Tran 2 is the next generation of Load side manual transfer switch by Reliance Controls. These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 16-in. flexible conduit whip attaches easily to a knockout on the load center and all factory wires are clearly marked and colored for identification. Simply select the circuits needed in an emergency and connect them to the Pro/Tran 2 wire leads as instructed in the manual. Pro/Tran 2 transfer switches feature a rugged powder-coated steel cabinet with six combination 1/2 in. and 3/4 in. knockouts and 1 in. interchangeable circuit breakers. The 1 in. breakers allow a larger circuit size (max of 1 x 30 ampere double-pole) and installation of AFCI and GFCI breakers. All models include a hinged detachable cover to help protect and finish off the overall look of the product.
$399.99
RELIANCE CONTROLS AY2215T Reliance Controls Color Connect 12/3 SJTW 125 Volt 12 inch L Splitter Cord - Case of: 1; (EA)
For safely connecting to a generator.
$22.99
RELIANCE CONTROLS PB-20 Reliance Controls Corporation PB20 20-Amp NEMA 3R Power Inlet Box for Generators Up to 5,000 Running Watts,Gray (EA)
The rain tight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance Panel/Link manual transfer panels and generator ready load centers. The power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the four combination 1/2 inch and 3/4 inch knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel.
$54.99
RELIANCE CONTROLS PB50 Reliance Controls PB50 50-Amp (CS6375) NEMA 3R Power Inlet Box,Gray (EA)
The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance Panel/Link manual transfer panels and generator-ready load centers. Using one of the four combination 1/2 in. and 3/4 in. knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel.
$99.99
RELIANCE CONTROLS PBN-50 Reliance Controls Non-Metallic Power Inlet Box, Amps 50 (EA)
The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and Panel/Link manual transfer panels and generator-ready load centers.
$109.99
RELIANCE CONTROLS PBN-50 Reliance Controls Non-Metallic Power Inlet Box, Amps 50 (EA)
The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and Panel/Link manual transfer panels and generator-ready load centers.
$109.99
