Bathroom Fixtures

The PlungeMax easily unclogs the toilet but withou

This is a stainless steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of swinging shower door and hold the door closed. Nylon latch allows for a soft but durable hold. The housing is designed to be adjustable with the elongated mounting slots which are 1 inch on center.

This is a universally used gray flat style shower door sweep that is 36 inch long and 1-1/2 inch wide and can be cut to size. It is held onto the swinging shower door by a drip rail that is located on the bottom of the door. Easy Installation, just remove the screws from the metal strip holding the old sweep and remove. Cut the new sweep to size, determine how far down the sweep needs to hang and install by replacing the drip rail over it and re-installing the screws.

This is a gray vinyl swinging shower door sweep made with a double Tee shaped insert at the top. The 2 Tee's at the top are 5/32 inch and 3/16 inch If your shower door needs the 5/32 inch Tee, just insert into the channel. If your door requires the 3/16 inch Tee, cut the 5/32 inch Tee off with a sharp blade. Before installing this shower door sweep make sure the channel is clean and clear of any obstructions.

These sliding shower door top bracket roller assemblies are constructed of extruded aluminum and come in a bright aluminum finish. They feature round edge plastic wheels and have steel ball bearings to provide for long-lasting, smooth operation. These types of top hung roller assemblies are designed for use with sliding glass shower doors that do not use a frame. Installation tip: to prevent glass from slipping out from roller assemblies, follow the installation instructions which require the application of a small amount of clear silicone adhesive (RTV-108) and a 24-hour dry time prior to hanging/using doors again.