Automatic Irrigation Equipment

The Raindrip Watering Kit for Vegetable Gardens makes it easy for any level gardener to set up a drip system. Get strong, vibrant gardens with easy-to-use components to water plants for optimal growth and overall health. The all-in-one kit includes 50 ft. of dripline (the first 15 ft. without drippers carries the water from faucet to plants); 1/2 GPH non-pressure compensating drippers spaced 12 in. apart & swivel adapter to connect to faucet; 10 galvanized steel stakes, & end plug to seal the end of the line. Forget hand watering with hose; save time and water with drip for a better way to water.

Prevent emitters from clogging by blocking particulates in water with the "Y" Filter. This component has a 3/4 in. MPT connection point on both ends to connect to 3/4 in. FPT spigot or pipe, such as a sprinkler riser in the ground. Pipe threads create a watertight seal when screwed tightly together. To install, position the directional arrow in the direction of water flow. The "Y" filter comes with a 150-mesh filter that is easily removable for maintenance; just unscrew the flush cap or cleanout cap, remove the middle housing, and pull out the filter to clean. The "Y" Filter is made of acrylonitrile butadiene styrene (ABS), and contains a polyvinyl chloride (PVC) washer with polyester filter, all treated with UV inhibitors

Prevent impure water from flowing back and contaminating the clean water supply with the Anti-Siphon Backflow Preventer. Required by most local health codes when using a potable, and sometimes non-potable water source for your drip system. The atmospheric vacuum breaker has a 3/4 in. FHT connection which threads onto the hose bibb or faucet; 3/4 in. MPT connection on the other side to attach to 3/4 in. FPT pipe. Removable filter washer blocks particles that can clog emitters. Use the directional arrow on the device to position in the direction of water flow. The Anti-Siphon Backflow Preventer is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.

Need to keep pesky bugs out of your tubing? Bug plugs prevents pests from entering the open ends of 1/4 in. tubing. These plugs are also designed to be used with high flow emitters and bubblers to diffuse water through the end of tubing in a way that reduces soil erosion. Push them in by hand; a fitting inserter tool such as the 3-in-1 Hole Punch Tool or 4-in-1 Cut N Punch Tool will also do the trick. Bug plugs are made of polypropylene (PP) treated with UV inhibitors.

Transition from FPT pipe or manifold to FHT distribution tubing or dripline in your drip system with the 3/4 in. MPT X 3/4 in. MHT Swivel Adapter. Convenient built-in swivel enables the end of the fitting to turn when attaching or removing it to keep tubing straight and prevent kinking. The fitting threads onto a 3/4 in. MPT connection point on one end and threads onto 3/4 in. MHT tubing on the other end. This adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

Convert an 1800 spray head or a riser to a drip zone. This all-in-one unit includes a 200-mesh filter and 30 psi pressure regulator for proper operation of a drip irrigation system.