Rain Drip R280DT Raindrip R280DT Drip-A-Long™ 1/4 in. Dripline Kit includes 50 feet of 1/4-Inch Dripline preassembled with 1/2 GPH drippers, 5 Barbed Tees, 5 Barbed Elbows, 5 Barbed Couplings, 5 End Plugs (EA)
Give your plants complete root zone hydration with the Drip-A-Long 1/4 in. Dripline Kit Comes with a 50 ft. coil of 1/4 in. dripline tubing, preassembled with fittings. The non-pressure compensating emitters inside the dripline are spaced 12 in. apart and emit water along the entire line. Connects to an outside faucet or hose bibb with included 3/4 in. FHT X 1/4 in. adapter; using a pressure regulator is recommended (sold separately). Dripline tubing and emitters made of 1/4" polyethylene; fittings made of acrylonitrile butadiene styrene (ABS); all treated with UV inhibitors.
$13.99
Rain Drip R290DP Drip Watering Soaker System (EA)
No drippers to insert in this polyethylene hose. Built-in pressure compensating turbulent flow drippers spaced at 18in intervals combine the reliability of drip watering with the convenience of soaker hose. Non clogging, patented pressure compensating drippers maintain a constant flow rate of 1 GPH with supply pressure up to 60 PSI. Durable, but flexible poly hose can be left above ground year round and removed for retilling and replanting. Expandable to 400' with less than 5% variation in dripper outflow.
$24.99
Rain Drip R301CT Raindrip R301CT Compression End Clamp Fitting, Fits 1/2-Inch - 5/8-Inch Tubing, in a Figure 8 Design, 5-Pack Blister Card, for Drip Irrigation Supply Tubing, Dripline, Drip Systems, Black (EA)
For the best and simplest solution, take the Tubing End Clamps, which stop the flow of water in your tubing or dripline using an uncomplicated yet ingenious figure-8 design. Simply insert tubing into one opening of the figure 8 fitting, fold the tubing over to create a kink, insert into the other opening to close, then slide the fitting toward the fold to secure it in place. Easy to use and economical, the clamp is removable, reusable, and works with any low-flow system. The end clamp is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
$3.99
Rain Drip R302CT Raindrip 100050106 Tube End Clamp 1/4" Carded, 0.25", No Color (EA)
The best solutions are sometimes as simple as the Tubing End Clamp, which stops the flow of water in your tubing or dripline. Simply fold the end of 1/4 in. tubing over to create a kink, then slide the end clamp over the kink, securing it into place. Easy to use and economical, the clamp is removable, reusable, and works with any low-flow system. The end clamp is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
$1.99
Rain Drip R307CT Raindrip R307CT, Barbed Tee, 1/4-Inch, 5-Pack, Drip Irrigation Fitting for Supply Tubing & Dripline, Black (EA)
The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a T intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it is easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS).
$3.99
