APOC 301 Asphalt Roof & Foundation Coating is water-based, liquid-applied and designed to restore worn asphalt roof surfaces (built-up roofs, modified bitumen, existing asphalt coatings) and dampproof exterior foundation walls. Product can be coated with a reflective coating 7 days after initial application. Can also be used to seal and protect underground wood footings and metal surfaces. For maximum performance APOC 301 requires a top coating of either gravel, granules or compatible APOC reflective roof coating.
APOC 365 Rubberized Flashing Cement is an extremely flexible, highly durable, long-lasting leak-repair designed to be applied in all-weather/seasons and in wet or dry applications. It can be used for patching splits, cracks and seams in spudded gravel, mineral surfaced cap sheet and smooth surface asphalt roofs, as well as composition shingle roofs as well as vertical applications. APOC 365 seals around chimneys, vent pipes, gravel guards, down spouts, cracks in concrete and more. APOC 365 exceeds performance requirements of ASTM D3409 and ASTM D4586, TYPE I and is Miami-Dade County Product Control Approved. * * For Use On: Flashing, Curbs, Vent Stacks, Seams, Drains, and More!
Protect your roof against the elements with APOC 365 Eterna-Flash All Weather Rubberized Flashing and Roof Cement. Designed for all-weather application, APOC 365 bonds to wet surfaces, easily bonds underwater and is ideal for temporary and permanent repairs. With an extremely versatile modified mastic, APOC 365 adheres to spudded gravel, mineral surfaced cap sheets, smooth surface asphalt roofs, most APP and SBS membranes and shingle roofs. Apply cement 0.125-inches thick, reinforce the repair by adding a layer of APOC reinforcing fabric and cover the fabric with an additional layer of cement. Follow all directions on label for application. Packaged in a 10-ounce tube for exterior use only.
Protect your roof against the elements with APOC 501 Caulk Super-Flash Thermoplastic Flashing and Roof Sealant. Designed to withstand extreme climates, Super-Flash stretches 250% to seal splits, cracks, holes and leaks. APOC 501 works on all common materials and cures to a long-lasting, rubber membrane. Apply with a caulking gun and if needed, smooth with a putty knife. Apply 0.25 inches thick, 2 or 3 inches beyond the problem area. It is highly recommended to reinforce the repair with a strip of APOC reinforcing fabric. Follow all directions on label for application. Packaged in a 10-ounce tube.
APOC 576 Premium Silicone White Roof Coating is a 100% silicone, extremely reflective roof coating for low slope roofs or areas where ponding water may occur. The high solids, low odor formula sets quick, will not crack, and can be applied in a wide temperature range. No expensive equipment necessary. Apply using a brush, roller, or sprayer. APOC 576 exceeds performance requirements of ASTM D6694, ASTM D7281, Title 24, and CRCC rated.
Protect your roof against the elements with APOC 581 Armor Flash Roof Sealant. Designed to seal flashings, curbs, penetrations, seams, HVAC systems and more, this sealant provides excellent adhesion to most common building materials. Fast and easy to apply, 100% silicone sealant is ideal for the contractor who demands maximum performance. Solvent free polymers are highly flexible and can be used in roofing and waterproofing applications. Coverage varies depending on warranty & term. Follow all directions on label for application. Packaged in a 1-gallon container.