ANVIL INTERNATIONAL 8700127650 Anvil 8700127650, Malleable Iron Pipe Fitting, 90 Degree Street Elbow, 1/4" NPT Male x NPT Female, Galvanized Finish (EA)
Anvil International offers the broadest line of Steel Pipe Couplings in galvanized finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards.
$7.59
ANVIL INTERNATIONAL 8700127700 Anvil 3/8 in. FPT x 3/8 in. Dia. FPT Galvanized Malleable Iron Street Elbow (EA)
Anvil International offers the broadest line of Malleable Iron Fitting in galvanized finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6.9 bar).
$7.59
ANVIL INTERNATIONAL 8700127759 Anvil 8700127759, Malleable Iron Pipe Fitting, 90 Degree Street Elbow, 1/2" NPT Male x NPT Female, Galvanized Finish (EA)
Anvil International offers the broadest line of Malleable Iron Fitting in galvanized finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6.9 bar).
$7.59
ANVIL INTERNATIONAL 8700127809 Anvil 8700127809, Malleable Iron Pipe Fitting, 90 Degree Street Elbow, 3/4" NPT Male x NPT Female, Galvanized Finish (EA)
Anvil International offers the broadest line of Malleable Iron Fitting in black finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6.9 bar).
$7.59
ANVIL INTERNATIONAL 8700127858 Anvil 8700127858, Malleable Iron Pipe Fitting, 90 Degree Street Elbow, 1" NPT Male x NPT Female, Galvanized Finish (EA)
Anvil International offers the broadest line of Malleable Iron Fitting in galvanized finish. Every fitting is manufactured and tested to meet Anvil’s strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6.9 bar).
$7.99
ANVIL INTERNATIONAL 8700127908 Anvil 8700127908, Malleable Iron Pipe Fitting, 90 Degree Street Elbow, 1-1/4" NPT Male x NPT Female, Galvanized Finish (EA)
Use this 90 degree street elbow pipe fitting to change the direction of pipes at a 90 degree angle. Made of malleable iron, which has high tensile strength and a galvanized finish.
$15.99
