Et-3g Epoxy Anchoring Adhesive W/ Nozzle, 22 Oz. Ea

ET-3G™ is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). et-3g has a long working time: 50 min at 70°f (21°c) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°f (10°c) to 110°f (43°c). Simpson strong-tie® epoxy anchors for concrete and masonry are rigorously tested to meet ibc requirements, including for both cracked and uncracked concrete applications.

• Exceptional performance superior bond strengths permit ductile solutions in high seismic areas
• Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
• Design flexibility improved sustained load performance at elevated temperature
• Jobsite versatility can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C)
• Manufactured in the USA using global materials
• 22-oz. side-by-side cartridge
• Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
• Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
• Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair SET-3G adhesive performance
• (1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge